Exactly how to Troubleshoot and Fix an Electric Hot Water Heater
Exactly how to Troubleshoot and Fix an Electric Hot Water Heater
Blog Article
What're your opinions concerning How to Troubleshoot and Repair an Electric Water Heater?
Numerous modern-day homes utilize an electric water heater for their heater, because of its ease and ease of use. Nevertheless, just like any other electrical home appliances, issues might arise with its usage, all of a sudden. It can be actually discouraging to awaken to a cool shower as opposed to a warm one or having your bath with water that isn't hot sufficient and even as well warm. Whatever the situation might be, water heater issues can be rather aggravating. The good news is, we've made a listing of possible options to your hot water heater concerns. There are a variety of variables that can trigger much of these troubles, maybe a concern with the power supply, the electric burner, or the thermostat. Prior to doing anything, guarantee you shut off the primary power supply for safety and security. Whatever the trouble is, getting it fixed should not pose too much of an issue if you follow these steps:
Inspect Your Power Supply:
As fundamental as this might appear, it is extremely needed. Without appropriate power, your hot water heater will certainly not operate. So the first thing to do when your water unexpectedly retires is to validate that it isn't a power trouble. Examine if the fuse is burnt out or the breaker stumbled. If the breaker is the concern, merely transform it on and off once more. Change any broken or worn-out fuse. Evaluate the appliance with power after these changes to see if it's now working.
Examine the Burner in the Water Heater:
If it's not a power problem, then attempt taking a look at your burner if it is still functioning. Evaluate each of your heating elements to ensure the trouble isn't with any of them. If any one of them is malfunctioning, replace that part and afterwards inspect whether the hot water is back on.
Check Your Thermostat:
If your water heater still isn't functioning or the water coming out isn't hot sufficient, you might need to examine the temperature level settings on your upper thermostat. Make certain the breaker is switched off prior to doing anything. Open the accessibility panel and press the red switch for temperature level reset above the thermostat. This should assist heat the water. Transform the breaker back on and examine if the issue has been solved.
Call A Professional:
If after changing all defective components as well as resetting your temperature, the hot water heater still isn't working, you might need to contact a specialist plumber for a professional point of view. The problem with your heating unit could be that the hot and cold faucets have been switched over or it may be undersized for the quantity of hot water required in your home. Whatever the instance may be, a specialist plumber would aid resolve the issue.
Verdict
Hot water heater troubles are not constantly major. Much of them are due to small issues like a blown fuse or damaged heating element. Replacing the damaged parts need to work. Nonetheless, if you are still unable to fix the problem, give a call to your nearby plumber to come to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a keen reader about What Would Cause My Electric Water Heater to Stop Working?, I think sharing that piece of content was a great idea. Kindly set aside a second to share this blog if you liked it. Thanks for your time invested reading it.
Call Us Today
Report this page